Finally got my TF F100 Kit

[Pepo]

Finally got My TF 100 kit

I am using 10.5% liquid Chlorine since my Salt system stop working.
My first reading is:

FC 3.5
TA 210
PH 8.2
CH 425
CYA 90

Thank you in advance for any input.


15,000 gal
Marquis Quartz Plaster Finish
Hayward C 4025 cartridge Filter
Hayward Super pump II 2.5 HP
Hayward 250,000 BTU Propane heater
AQL PS4 controls

Pepo

 

[Defgufman]

TA And ph need to come done and you need FC in there asap.

- - - Updated - - -

At cya 90 your maintenance target if 10 ppm fc

 

[umpalumpajay]

yeah, without the salt cell running, you have to jack the FC up to regular pool levels. you're too low even for a SWG pool anyway - if it were operational you could probably do a FC of 7. get that ph down for sure.

 

[Texas Splash]

Probably goes without saying ... but with the CYA at 90, make sure you do not add any sanitizer other than liquid chlorine (bleach)/liquid shock to your pool. You don't want that CYA figure to increase. Good to see you're using your TF-100!

 

[pooldv]

Welcome to TFP and congrats on the test kit!

Your chlorine is probably low. Chlorine needs to be maintained above the minimum level for your CYA level at all times or algae can start to grow. Chlorine CYA Chart

Welcome to TFP!

Here are some intro Pool School articles to read while you wait for your test kit
TFPC for Beginners
ABC's of Pool Water Chemistry

Here are the Recommended Levels for your pool.
Here are the Recommended Pool Chemicals to maintain your pool and how to add them.
Use PoolMath to figure out how much to add.