Have a SWG online this past week and still tweaking to get pump run times and % set on the generator. Currently have been running 9 hours on low speed at 50% on the generator. My latest test showed a Tot. Chlorine level of 10 and FC level of 6.4. I want it in the 3 range. I know I need to adjust the cell percentage down. Is 30% appropriate? Or should I go 10% at a time to get it adjusted?
Reading through my owner's manuals the Intellichlor has a SuperChlorination is this all I would need to do?
Pool store says to add OxySheen to shock to get rid of the combined chlorines.
pH 7.5
TA 127
CYA 70
Total Hardness 157
Thanks.
Reading through my owner's manuals the Intellichlor has a SuperChlorination is this all I would need to do?
Pool store says to add OxySheen to shock to get rid of the combined chlorines.
pH 7.5
TA 127
CYA 70
Total Hardness 157
Thanks.