About to pull the trigger on our new IG vinyl pool. A concern of mine has been filling the pool initially for start-up; whether to use a water truck and city tap water (which is available to me) or just fill it from my well.
We will have an 18x36 ~19,500 gals. Regardless of where or how I get my initial fill water, I will have to deal with maintaining levels so it's kind of unavoidable drawing from my well. Here are the numbers:
Iron: .01 mg/l
Manganese: .065 mg/l
ph: 6
0 hardness
Obviously the manganese will have to be dealt with...but how? and ph will obviously have to come up, not too worried about...should I? :lol:
thoughts from the forum?
We will have an 18x36 ~19,500 gals. Regardless of where or how I get my initial fill water, I will have to deal with maintaining levels so it's kind of unavoidable drawing from my well. Here are the numbers:
Iron: .01 mg/l
Manganese: .065 mg/l
ph: 6
0 hardness
Obviously the manganese will have to be dealt with...but how? and ph will obviously have to come up, not too worried about...should I? :lol:
thoughts from the forum?