liquidator hookup to intelliflo

[carlos31]

Has anyone using a Liquidator hooked up a line to the drain plug on an Intelliflow? If so, do you remember what size the fitting needed to be? NPT is such a PITA. It looks like 3/8 or 1/2 NPT. I know I could take the plug to the store but that means the pump is down for 1/2 day and I am still running 24x7 during the plaster curing period.

thanks if you happen to remember

carlos

 

[Hotrod30]

I think it is 3/8 inch. The washer is listed as 3/8 ID X 7/8 OD.

 

[Aquaman95]

Most drain plugs are 1/4 NPT. Never looked on the Intelliflow but it's fairly standard.