Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Trying to figure out the model of in-floor distributor

  1. Back To Top    #1

    Join Date
    May 2015
    Location
    Concord, MA
    Posts
    2

    Trying to figure out the model of in-floor distributor

    Bought a house with an in-ground pool in the fall and am now trying to figure out what I've got. Heater is shot (and disconnected). D/E filter looks as if it could go a few more seasons. The photos are of a piece that was stored in the basement. This looks like a Paramount but the housing outside says Anthony Pools.
    Any ideas?

    Thanks!


    Filter2.jpgFilter1.jpg

  2. Back To Top    #2

    In the Industry

    Join Date
    Mar 2011
    Posts
    441

    Re: Trying to figure out the model of in-floor distributor

    Quote Originally Posted by pumori View Post
    Bought a house with an in-ground pool in the fall and am now trying to figure out what I've got. Heater is shot (and disconnected). D/E filter looks as if it could go a few more seasons. The photos are of a piece that was stored in the basement. This looks like a Paramount but the housing outside says Anthony Pools.
    Any ideas?

    Thanks!


    Filter2.jpgFilter1.jpg
    Anthony and paramount are the same thing. This is a standard 6 port assembly.
    20X40 30,000 gallon gunite pool

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •