Hey guys I was sticker shocked when I researched a new pressure switch for my heater. I saw prices over $100. My question is, is there a cheaper alternative to use in my application?? The part number of the original switch is EE05-Q11. Thanks in advance!
Pressure switch for 150,000 btu 90s heater (Millivolt)
- Thread starter Discobrian24
- Start date
Pool Clown
In The Industry
You need a pressure switch that will close at about 3-4 psi, and have the correct threads for the header that it goes into. Are you sure that the switch is not working and that it's not just your baskets, impeller and filter that may need to be cleaned?
It is the electrical part of the switch. I think the tab broke off for the wire. I will have to look into it tonight.
You can use this one with no issues.
http://www.amazon.com/Tecmark-TDI39...8&qid=1431134534&sr=8-2&keywords=tecmark+3902
http://www.amazon.com/Tecmark-TDI39...8&qid=1431134534&sr=8-2&keywords=tecmark+3902
Thanks found one, but if that doesnt work I will use the link you provided.. Greatly appreciated!!
Ok the one I found would not work as the connection to the copper line was different so i just took the good switch off the new one and screwed it to the old one.