Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 4 of 4

Thread: Is anyone replacing a Hayward H250 pool heater? I need this board from inside it

  1. Back To Top    #1

    Join Date
    May 2015
    Location
    Elkhart, IN
    Posts
    2

    Is anyone replacing a Hayward H250 pool heater? I need this board from inside it

    Here is a picture of the part I need:

    I have a Hayward H250 pool heater - about seven years old. It is not working, and a neighbor helped me trace the problem to this board. Is anyone replacing a Hayward H250 heater that might be able to sell this part to me?

    Thanks!

  2. Back To Top    #2

    TFP Guide

    Join Date
    Jun 2012
    Location
    western NY
    Posts
    1,557

    Re: Is anyone replacing a Hayward H250 pool heater? I need this board from inside it

    What was the heater doing/not doing when you decided the board was bad?

    check the solder connections on the back of the board where the 3 white plug connections are. These are notorious for cracking the solder joints.
    Unknown make 18' above ground (bought used in 1999) Sparco sand filter. Hayward 100,000 BTu heater. 2 speed pump

  3. Back To Top    #3

    Join Date
    May 2015
    Location
    Elkhart, IN
    Posts
    2

    Re: Is anyone replacing a Hayward H250 pool heater? I need this board from inside it

    Quote Originally Posted by danpik View Post
    What was the heater doing/not doing when you decided the board was bad?

    check the solder connections on the back of the board where the 3 white plug connections are. These are notorious for cracking the solder joints.
    ________________

    Thank you for your help and your reply.

    It was in the fall, and I've slept since then, but I think it had no power at all?

    I'm not sure what exactly to look for, but I don't see any cracking or separation on the back side of the board by those three places...

  4. Back To Top    #4

    In the Industry

    ps0303's Avatar
    Join Date
    Jul 2011
    Location
    FL
    Posts
    3,437

    Re: Is anyone replacing a Hayward H250 pool heater? I need this board from inside it

    Have you checked the transformer inside the heater to make sure you have power coming in?
    Paul
    http://www.gastekservices.com A word of caution: When working with gas and electrical you might want to consider a licensed contractor. Consider the value of your life and others around you. If you would like to provide a review of the help I provided, please use the following link to leave a review. gastek - Google Search,

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •