I have been working in trying to get my chemicals right for about 2-3 weeks now. First reading I had to add stabilizer, shock, ph down, alkalinity and hardness increased. 2nd reading had to super chlorinate(salt water generator) 3rd reading had to add shock and stabalizer. Let pump run for at least 8 hours a day. Today's reading I need alkalinity, ph down and of course shock again.
Current readings:
pH: 8.2
FC: 1.1
Total chlorine: 1.1
CYA: 92
Total alkalinity: 65
Total hardness: 222
Salt: 3400
These readings have been from pool place. Water is crystal clear. We have changed sand in filter. I am now at a loss and ready to put cover backbone it. We live in Ga. The pool is an 18x32 unground with vinyl liner. I believe total gallons is 24,000. We keep our SWG output on 72%. Any advice? Not sure how to put pic on here but I have some if that would help.
Current readings:
pH: 8.2
FC: 1.1
Total chlorine: 1.1
CYA: 92
Total alkalinity: 65
Total hardness: 222
Salt: 3400
These readings have been from pool place. Water is crystal clear. We have changed sand in filter. I am now at a loss and ready to put cover backbone it. We live in Ga. The pool is an 18x32 unground with vinyl liner. I believe total gallons is 24,000. We keep our SWG output on 72%. Any advice? Not sure how to put pic on here but I have some if that would help.