Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 4 of 4

Thread: SWG reading not moving

  1. Back To Top    #1

    Join Date
    Sep 2014
    Location
    Bluffton/IN
    Posts
    48

    SWG reading not moving

    SWG has been stuck at 4200ppm (I know high) for over a month. I have turned off/on and added/flushed plenty of water and added no salt. Thoughts?
    In-ground fiberglass hybrid (25K gal), Raypak Natural Gas, Hayward S-244S Sand filter, AquaRite SWG
    NE Indiana TF-100 test kit

  2. Back To Top    #2

    Join Date
    Jan 2013
    Location
    Friendswood, TX
    Posts
    320

    Re: SWG reading not moving

    What does your salt test indicate?
    ~Paul
    19x40 IG including 10' BE, 18,000 gal, plaster, 48 SF DE, 1.5HP pump, AquaPure SWCG, Ozonejoe 30MR, Rockwaterfall, LED light, TF-100 Fill date 11/21/2014
    My ODK Build | My Pool Build | If You're From Texas Vote Here

  3. Back To Top    #3

    Join Date
    Sep 2014
    Location
    Bluffton/IN
    Posts
    48

    Re: SWG reading not moving

    I have not tested it. Does the TF-100 have a salt test?
    In-ground fiberglass hybrid (25K gal), Raypak Natural Gas, Hayward S-244S Sand filter, AquaRite SWG
    NE Indiana TF-100 test kit

  4. Back To Top    #4

    Join Date
    Jan 2013
    Location
    Friendswood, TX
    Posts
    320

    Re: SWG reading not moving

    No. Taylor has an independent test. I would get this and test the salt content yourself prior to troubleshooting the SWCG readout.
    ~Paul
    19x40 IG including 10' BE, 18,000 gal, plaster, 48 SF DE, 1.5HP pump, AquaPure SWCG, Ozonejoe 30MR, Rockwaterfall, LED light, TF-100 Fill date 11/21/2014
    My ODK Build | My Pool Build | If You're From Texas Vote Here

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •