Air collecting in the filter

Acho

0
Apr 28, 2015
25
Las Vegas, Nevada
Hi all,

I am new member and new to the pools in general. We got house with inground pool and spa about 12 000 gallons. We have Pentair VS pump and sollar panels installed.

It works good beside lots of air collecting in the filter during pump operation. For about 2 hours the air collected is may be half of the filter body /it starts to send air to the pool return/.

Where I should start looking for air leak and what would be the reason for this problem?

Thaks in advance for all the help!
 
:wave: Welcome to TFP!!!

Well, the issue must be on the suction side of the pump (between the pool and the pump). Make sure there is enough water in the pool and there is not a vortex in the skimmer. Check and lube the pump lid and drain o-rings. Those are the easy places to start.

Check out this article in Pool School for more ideas: http://www.troublefreepool.com/content/151-suction-side-air-leaks
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.