Just Refilled Pool

I am new to pool care. I just refilled my 30000 gal pool. I used K-Taylor 2006 Complete Test Kit. I am a little unsure about my results, but here they are:
FC 15 PPM
CC 4 PPM
pH 7.3
TA 80 PPM
CH 100 PPM
CYA 65
I ran PoolMath and got some incredible amounts of chemicals to add.
I am also interested Borate.
What do do I do now?
 
Note that PoolMath doesn't tell you what to do, it tells you how to do something that you decide you want to do. Most likely you have some inappropriate numbers in the Target column, resulting in partially inappropriate output.

The big issue here is the CYA reading. Do you have any idea why the CYA reading went up so much? If you feel confident in the CYA reading, you will need to replace water to get CYA down to something more reasonable. But such a large change from your first reading seems unlikely.

TA is fine where it is (unless you use trichlor tablets).

You do need to raise CH, but put that off until everything else is more under control.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.