Maytronics M5/M500 Power Supply Part Number

[dhc]

Hi,
I am trying to investigate why the delay function of the Maytronics Pro Remote (99954226-ASSY) is not working on my Dolphin Triton Plus. I had confirmed with Maytronics Support before that it should work with my power supply (part no 9995678) but after receiving the remote it definitely does not work.

Could somebody with a M5/M500 let me know what the power supply part number is? It is printed on the bottom of the power supply and starts with 999.

 

[dhc]

I actually just found an ebay listing that shows which power supply fits which robot. However, this does not explain why the delay start does not work on my Triton Plus.

9995670 - Power Supply fits the following pool cleaners:

Advantage - 9999301
3001 - 9999321
SCP - 9999301-SCP
Commander - 9999301-COM
Sprite - 9999301-SPR
Deluxe + Caddy - 9999311-DLX
3001 - 9999321-BL
Nautilus - 99996323
Saturn - 99996306
Saturn - 99996319-SAT
DX5 - 9999311-DX5
Heavy Duty - 9999389-HD
Deluxe 4 - 99996351

9995671 - Power Supply fits the following pool cleaners:


PRO X2 - 9999393X
PRO X2 - 9999393X-BL
PRO X2 - 9999399X-BL
Wave 90 - 99991083-W90
Wave 100 - 9999396X
Supreme M5 - 99991083-US
DX6 - 99996363-DX6
Advantage Plus with Caddy - 9999313RC
Advantage Plus Pro - 9999336-ADV
3001 - 9999326-BL
Enduro - 9999343X-END


9995672 - Power Supply fits the following pool cleaners:

Interactive 9999301-INT
Explorer - 9999301-EXP
Supreme M3 - 99996333-US
DX3 - 99996333-DX3
Endeavor - 99996316
Atlantis Basic - 99996303
Quest - 99996329

9995678 - Power Supply fits the following pool cleaners:


Heavy Duty - 9999381
Supreme M4 - 99991013-US
Supreme M5 - 99991086-US
DX4 - 99996343-DX4
DX6 - 99996369-DX6
Apollo - 99996343
Apollo Plus - 99996053-US
Triton - 99996356
Edge - 99996359
Discovery - 99996349
Wave 50 - 9999386
Wave 75 - 99996366
Wave 75 - 99996369-W75
Premier - 99996339

 

[jtaves85mcss]

Just a quick thought in troubleshooting this. Instead of the power pack having the timer, is it possible that the M5 remote has a built in timer and sends the delayed start function to the power pack after the time lapse, and therefore it must be in close proximity to the unit when the time lapses. If so, do you have the remote close enough to operate it at that time?

An M5 owner that has used the remote for this for this feature can likely confirm whether this is the case.

I am curious about the outcome of this in general, as I am considering buying an M5(500).

 

[dhc]

I did leave the remote close to the battery pack. but the fact that the robot immediately starts tells me it is not the remote sending the signal. Also, all remotes - the original and the pro model - switch off after a few minutes of inactivity. One difference I noticed between the original and the pro model is that the pro model does not give an audible confirmation when you hit the OK button.
If there is a M5(00) owner out there could you please confirm if you get an audio confirmation when you press the OK button? Maybe the remote is broken or at least the part that sends the programming. The manual mode works fine after all.

 

[Patrick_B]

Mine does give the audible with the OK button. I'm certain of it. Mine too goes off rather quickly when not used.