This is most probably a question for Sean at Auto Pilot.
A note to the moderator I realize that this might be somewhat of a "Deep End" question but my reasoning for posting it here is that Sean may not view the "Deep End" as often and I was looking for a quick answer as he is very good about answering questions quickly if viewed in this area. You are welcome to move it to the "Deep End" should you wish, either now, or preferably after he has answered the question, if you deem it appropriate. Thank you for your consideration of this note.
If the SC-60 Pool Pilot 24 hour maximum chlorine production at Level 3 is 1.92 lbs, per the manual. What is the 24 hour maximum production at level 2, if the salt level is 3500 ppm?
Or with an ORP control is the level irrelevant in that Level 1, 2, or 3 all produce at the same level, that being 100%, when the reading is lower than the set ORP?
Another question, does the production level vary if it is near the set ORP level on the Digital unit? Example if the ORP is set at 690, and the shown ORP level is now 685, is the production reduced compared to a shown level of 660, in other words does it produce more at 660 than at 685. I know that once it surpasses the 690 level it switches off the chlorine production.
Love the unit it works great, but still trying to understand the fine details.
Your past help is much appreciated.
Aloha
A note to the moderator I realize that this might be somewhat of a "Deep End" question but my reasoning for posting it here is that Sean may not view the "Deep End" as often and I was looking for a quick answer as he is very good about answering questions quickly if viewed in this area. You are welcome to move it to the "Deep End" should you wish, either now, or preferably after he has answered the question, if you deem it appropriate. Thank you for your consideration of this note.
If the SC-60 Pool Pilot 24 hour maximum chlorine production at Level 3 is 1.92 lbs, per the manual. What is the 24 hour maximum production at level 2, if the salt level is 3500 ppm?
Or with an ORP control is the level irrelevant in that Level 1, 2, or 3 all produce at the same level, that being 100%, when the reading is lower than the set ORP?
Another question, does the production level vary if it is near the set ORP level on the Digital unit? Example if the ORP is set at 690, and the shown ORP level is now 685, is the production reduced compared to a shown level of 660, in other words does it produce more at 660 than at 685. I know that once it surpasses the 690 level it switches off the chlorine production.
Love the unit it works great, but still trying to understand the fine details.
Your past help is much appreciated.
Aloha