Based on what I've read on the forum, it doesn't seem like what I'm trying to do will be a problem......but I wanted to make sure before I start gluing PVC together.The image below is what my plan is. That is a picture of the vertical install kit off the discountsaltpool.com website, but I flipped it vertically to make it work with my setup. It's only 38 inches directly from point A (filter out) to point B (return) in the image so that doesn't leave me a lot of room if I go horizontally with my cell (Circupool SI30+). Any glaring issues with what I'm trying to do? My main concern is having it installed upside down based on what the kit is showing, maintaining proper water flow etc. My old Permasalt system had the copper cell thing screwed directly onto point A (hence the tape on the threads), so maybe I'm over complicating this and can do that with the SI30+, putting the flow sensor behind the cell? Thanks in advance.