- Jun 3, 2014
- 31
So few questions here. I have started setting up my intellitouch and the instructions are not very good. I am familiar with automation, certified for Lutron controls, and familiar with wiring. My intellitouch has the wireless transceiver setup with Screen Logic2. Im using a laptop and and iPhone. The laptop connects, reads the air and water temps, as does the iPhone app. so its not like they aren't communicating. My intellibright lights work also through the app or computer. But not much else does.
Goals are:
Control Heat Pump
Control Gas Heater
Control Lights (which are currently working)
Control Auto pilot ---Read older threads that say this isn't a great idea. mine is reading it, but doesn't read salt level. I don't have to control this, however then what is the best way to turn this on and off with the pump if the pump is controlled by intellitouch but the auto pilot isn't.
Control the pump
Control the Basic deck Jets
Control the Magic lighted jets----
to control the the deck jets a Valve actuator needs to be control
to control the magic jets a second one also needs to be controlled
The Actuators came with the personality kit, and only seem to turn when I push the valve button on personality board while in service mode. The valves move 180 degrees and only want them to turn 90. Maybe that is in the programming (configureing) but I cant find it anywhere. Also, the gas heater has a blank screen like it has no power at all. I unhooked the jumper on the fireman switch and hooked my two wre control wire in this place per instructions. The Heat pump has power, but still doesn't seem to be controlled by the system.
Any advice or questions would be greatly appreciated.
Thanks
Greg
Goals are:
Control Heat Pump
Control Gas Heater
Control Lights (which are currently working)
Control Auto pilot ---Read older threads that say this isn't a great idea. mine is reading it, but doesn't read salt level. I don't have to control this, however then what is the best way to turn this on and off with the pump if the pump is controlled by intellitouch but the auto pilot isn't.
Control the pump
Control the Basic deck Jets
Control the Magic lighted jets----
to control the the deck jets a Valve actuator needs to be control
to control the magic jets a second one also needs to be controlled
The Actuators came with the personality kit, and only seem to turn when I push the valve button on personality board while in service mode. The valves move 180 degrees and only want them to turn 90. Maybe that is in the programming (configureing) but I cant find it anywhere. Also, the gas heater has a blank screen like it has no power at all. I unhooked the jumper on the fireman switch and hooked my two wre control wire in this place per instructions. The Heat pump has power, but still doesn't seem to be controlled by the system.
Any advice or questions would be greatly appreciated.
Thanks
Greg