Suntouch Control Panel has no power

[RichC]

I cleaned my swg and upon reconnecting noticed I had no power to my Suntouch panel. I did not do anything but disconnect the swg and as far as I can tell all the wireing is properly connected. I have power to the swg, everything was working last night when it turned at at the set time.

Thoughts?

 

[JasonLion]

Welcome to TFP!

Check your circuit breakers, one of them may have tripped.

 

[RichC]

Reset all circuit breakers all the way back to the main box, tried the 2 breakers on the control panel itself and still no power to the control panel. Relooked that all the wiring is connected although all I did was disconnect the swg.

 

[JasonLion]

The next step is to get a multi-meter and work backwards from the SunTouch until you get to somewhere that actually has power.

 

[pooldv]

Is there a fuse in the Suntouch? Can't remember for sure, but it seems like there is a glass fuse in my Solartouch.

 

[RichC]

Has 2 push button type breakers on the front panel.