The reading at the highest point of the white peak, not the bottom of the white mountain reads 6.6 or 4740 ppm, the bottom of the mountain reads 6 or 3740 ppm, after 10 minutes.. The PoolPilot Total digital reads 3600, sometimes 3700. Taylor reading 3800. So which is correct?
The Aquachek strips are only a few weeks old, but Hawaii is humid even though the container is tightly sealed, could that be the issue?"
Does the PoolPilot automatically read the correct level or does one have to adjust it, is there a way to reset this reading to the factory level?
I realize that the optimum max level (per Sean) should be 3500.
For information, here in Hawaii the salt level actually climbs by about 100 ppm per month in both my and my neighbours pool (including backwashing once per month). Not sure why but it might be caused by the salty air or salty rain.
Any help would be appreciated.
Aloha.
The Aquachek strips are only a few weeks old, but Hawaii is humid even though the container is tightly sealed, could that be the issue?"
Does the PoolPilot automatically read the correct level or does one have to adjust it, is there a way to reset this reading to the factory level?
I realize that the optimum max level (per Sean) should be 3500.
For information, here in Hawaii the salt level actually climbs by about 100 ppm per month in both my and my neighbours pool (including backwashing once per month). Not sure why but it might be caused by the salty air or salty rain.
Any help would be appreciated.
Aloha.