Hello. New member from Phoenix, AZ here. We recently purchased a 10 year home with an in ground pool. I took measurements and the pool we have is roughly 14,000 gallons. It was orginally a salt cell pool but I'm pretty certain the SWG is past it's effective life so I thought I would give the TFPM a go. I received my test kit yesterday and here are my numbers:
FC 16 PPM
PH 7.8at
Calcium Hardness 1200
TA 140
The CYA test made the black dot at the bottom not visible even before the water level reached the first 100 mark on the graduated cylinder.
I know the Chlorine level is high so I figured just give it time and see if the level comes down. Is there anything else i should do?
FC 16 PPM
PH 7.8at
Calcium Hardness 1200
TA 140
The CYA test made the black dot at the bottom not visible even before the water level reached the first 100 mark on the graduated cylinder.
I know the Chlorine level is high so I figured just give it time and see if the level comes down. Is there anything else i should do?