What should my first step be in this pool? I want to pound it with bleach ! My ph Is high right now. This was a bank owned and I sweep out leaves as much as I can .
What Should My First Steps Be?
- Thread starter Sarah1012
- Start date
- May 22, 2013
- 2,796
- Pool Size
- 12000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Re: Pool cloudy and going green, help please.
Adjust the pH 7.2/7.4 and start your SLAM http://www.troublefreepool.com/content/125-slam-shock-level-and-maintain-shockingl
Post a full set of results
Adjust the pH 7.2/7.4 and start your SLAM http://www.troublefreepool.com/content/125-slam-shock-level-and-maintain-shockingl
Post a full set of results
Welcome to the forum. 
You must know where you are before you can get where you want to be.....i.e. a complete set of test results to establish your current condition and then the SLAM process, followed precisely as outlined in Pool School.
You must know where you are before you can get where you want to be.....i.e. a complete set of test results to establish your current condition and then the SLAM process, followed precisely as outlined in Pool School.
- May 22, 2013
- 2,796
- Pool Size
- 12000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Forgot my manners. Welcome to the forum Sarah
That and do you have a good test kit yet ?
You are going to need one to do a proper SLAM. A TF-100 or K2006 that can do FAS-DPD. I have the TF100 and it's what most here recommend.
http://tftestkits.net/TFTestkits-TF-100-p4.html
https://www.google.com/search?q=k2006&ie=utf-8&oe=utf-8
That and do you have a good test kit yet ?
You are going to need one to do a proper SLAM. A TF-100 or K2006 that can do FAS-DPD. I have the TF100 and it's what most here recommend.
http://tftestkits.net/TFTestkits-TF-100-p4.html
https://www.google.com/search?q=k2006&ie=utf-8&oe=utf-8
Agreed with all points provided thus far. Don't go nuclear til you know where you're going.
