I have an aquarite generator and it is reading" hot" I have tried unplugging the salt cell and turning off the power to reset it but it does not help. I called one pool store and they told me my salt cell is ruined, the sensor inside is ruined they say...
I took the salt cell off and rinsed it in water and muratic acid and it stopped flashing and ran normally for about 1 hour. My pool water is very cloudy because I added an algaecide and not I am at a loss about what to do.. It is a goldline t-15 but I have a very small pool and I see on the internet that my pool only being about 10,000 gallons I should be using a t-3 which is for smaller pools.
can anyone help me with this?
Thank you, Patricia
I took the salt cell off and rinsed it in water and muratic acid and it stopped flashing and ran normally for about 1 hour. My pool water is very cloudy because I added an algaecide and not I am at a loss about what to do.. It is a goldline t-15 but I have a very small pool and I see on the internet that my pool only being about 10,000 gallons I should be using a t-3 which is for smaller pools.
can anyone help me with this?
Thank you, Patricia