Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Cell, board or display problem?

  1. Back To Top    #1

    Join Date
    Jan 2015
    Mobile, Al

    Cell, board or display problem?

    Hello everyone,

    My first post. Like many here I have the aqua rite system for about 7 years. I am on my second cell which is less than 2 years old. I currently have four boards with two just given to me by a local pool store. Today, I swapped out three boards. When I cut the power on they show no flow for 30 seconds and then all lights go out. On two of the boards the salt level is displayed albeit it two different levels. Not concerned about that but on these two boards and maybe the other board I am not getting any voltage or amps when you run through the diagnostics. The black varsitor looks fine on these boards. Does anyone know why I don't have voltage? Bad cell, phone line or white cord connector, bad display?

    Please help.



  2. Back To Top    #2
    bobodaclown's Avatar
    Join Date
    Apr 2011
    Lakeland, FL

    Re: Cell, board or display problem?

    Have you checked this out:
    17K Kidney Shaped Pool Concrete (Diamond Bright) Pool, 3/4 hp 2 speed 115V Sta-rite Duraglas PEA5D-180L/P2R5D-181L (Impeller C105-92PS Diffuser C1-216P), 1.5 piping, Pentair CC100 Filter , Heat Siphon 100K BTU Heat Pump Pool Heater, Flow meter Blue White Flowmeter Model No. F-30150P, Hayward Astrolight SP0581N, SWCG CalimarTitanium Edition TE45 , Dolphin Nautilus Plus with CleverClean, Lakeland Florida

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts