Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Jandy Visio diagraming stencils

  1. Back To Top    #1

    Join Date
    Apr 2014
    Location
    Austin TX
    Posts
    10

    Jandy Visio diagraming stencils

    Does anyone have diagram stencils for Visio or Omnigraffle? I wanted to diagram my equipment and flow but don't want to create from scratch. Below is a link to some example diagrams.

    http://www.poolcenter.com/plumbingSchematics
    _____
    18k gal in-ground plaster pool+spa, 2HP Jandy pump, 460 sqft Jandy cartridge filter, AquaPure 1400 SWG,
    3/4HP cleaner pump, Polaris 280 cleaner, Jandy LX heater, 2HP air blower, FlowVis check valve, iAqualink, TF-100 test kit

  2. Back To Top    #2

    Join Date
    Apr 2014
    Location
    Austin TX
    Posts
    10

    Re: Jandy Visio diagraming stencils

    Couldn't find anything, so created one for my equipment. Feel free to use attached stencil if you also use OmniGraffle. I'll upload it to Graffletopia eventually.

    Stencil.jpg

    Pool Plumbing Stencil.zip
    _____
    18k gal in-ground plaster pool+spa, 2HP Jandy pump, 460 sqft Jandy cartridge filter, AquaPure 1400 SWG,
    3/4HP cleaner pump, Polaris 280 cleaner, Jandy LX heater, 2HP air blower, FlowVis check valve, iAqualink, TF-100 test kit

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •