So I have noticed lately my pool pump has not been holding its prime and I am starting to get bubbles out of my spa jets which lead me to start looking for a leak in my pool. I have found one at the suction joint where my pool pvc piping meets my pump. However my piping has no unions or space whatsoever. The only way looking at it to repair the leak is to ripe out all of the piping and start from scratch. Before I do this I wanted to ask the members on here there thoughts before I start this process as I litearly seeing me replacing all pvc piping and valves due to the original design.....FYI I am having problems getting a good pic to load so in the meantime I am hopeful the one that did upload may help assit