Hello to all,
Have heard a lot of war stories lately about pool finishes, and I do not want to be a potential casualty. Sorry for those that have been/are.
I do all of my correspondance w PB in e-mail. Will not accept verbals, period.
Our contract stipulates a PebbleTech finish. Went on Peb-Tech website and really hard to tell what looks good w bad reflections on pool examples except a few. Small internet samples do not cut it...like looking at a small piece of your tie then trying to buy a suit from that. It has to be viewed in context, and I value your opinions and essential context.
So, I wanted to know what colors the folks on the board here has selected that:
1). They liked just as much after installing w filled w water as they did during the selection process?
2). Liked the PTech sample but did not like it for whatever reason afterwards and why?
3). Had any problems during installation and how did they get corrected?
Our coping, pool water-line tile, wall and 4 columns [2 scuppers in middle and 2 fire-bowls on the end/copper bowls w dark glass in bowls] are all travertine. as well as spa & spa spillway...All lighter earthly colors. The decking which is 1500sq ft of travertine too, in the versaille pattern. We have a tanning ledge and two nice long 18" deep benches in two diff areas..
I like the blue-based patterns, but wife and daughters will be voting too [do I have a chance?]
Anyway, pls let me what has worked and what has not. Any and all advice is appreciated.
Best regards,
tstex
Note: After ours in installed and water filled, I will provide my feedback to this post as well,
Have heard a lot of war stories lately about pool finishes, and I do not want to be a potential casualty. Sorry for those that have been/are.
I do all of my correspondance w PB in e-mail. Will not accept verbals, period.
Our contract stipulates a PebbleTech finish. Went on Peb-Tech website and really hard to tell what looks good w bad reflections on pool examples except a few. Small internet samples do not cut it...like looking at a small piece of your tie then trying to buy a suit from that. It has to be viewed in context, and I value your opinions and essential context.
So, I wanted to know what colors the folks on the board here has selected that:
1). They liked just as much after installing w filled w water as they did during the selection process?
2). Liked the PTech sample but did not like it for whatever reason afterwards and why?
3). Had any problems during installation and how did they get corrected?
Our coping, pool water-line tile, wall and 4 columns [2 scuppers in middle and 2 fire-bowls on the end/copper bowls w dark glass in bowls] are all travertine. as well as spa & spa spillway...All lighter earthly colors. The decking which is 1500sq ft of travertine too, in the versaille pattern. We have a tanning ledge and two nice long 18" deep benches in two diff areas..
I like the blue-based patterns, but wife and daughters will be voting too [do I have a chance?]
Anyway, pls let me what has worked and what has not. Any and all advice is appreciated.
Best regards,
tstex
Note: After ours in installed and water filled, I will provide my feedback to this post as well,