I have an inground pool with vinyl liner at the house I recently bought. It has a Polaris Sport 380 and a new Polaris PB4-60 motor on the Polaris pressure clear. Both motors are wired for 240V. I noticed that both the main pump and the pressure cleaner pump are wired onto a single Intermatic T104 timer. So both come on and go off at the same time.
I would like to have separate timer control on the two of them. I'm looking at the Intermatic P1353ME and the P1403ME. And I would like the pressure cleaner motor to come on AFTER the main motor has started.
I like the the fact the P1403ME has a super cap to backup the programming (and I assume time) and seasonal adjust. However the P1403ME is a noticeably cheaper (~$40-$50 cheaper) than the P1353ME. So it makes me wonder if there is something better for this application such that I should use the P1353ME instead.
Any advise/experience with either would be appreciated.
Thanks in advance!
I would like to have separate timer control on the two of them. I'm looking at the Intermatic P1353ME and the P1403ME. And I would like the pressure cleaner motor to come on AFTER the main motor has started.
I like the the fact the P1403ME has a super cap to backup the programming (and I assume time) and seasonal adjust. However the P1403ME is a noticeably cheaper (~$40-$50 cheaper) than the P1353ME. So it makes me wonder if there is something better for this application such that I should use the P1353ME instead.
Any advise/experience with either would be appreciated.
Thanks in advance!