Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: a o smith 1 1/8 hp motor c48l2a16

  1. Back To Top    #1

    Join Date
    Oct 2014
    Location
    galena,ohio
    Posts
    1

    a o smith 1 1/8 hp motor c48l2a16

    this motor is on a shopsmith. it runs fine when not under load. when under load it turns very slowly and then causes the circuit breaker to cut out. I have replaced the capacitor to no avail, same result.

  2. Back To Top    #2
    mas985's Avatar
    Join Date
    May 2007
    Location
    Pleasanton, CA
    Posts
    11,479

    Re: a o smith 1 1/8 hp motor c48l2a16

    Sounds like the equipment might be binding somewhere causing extra load on the motor. What type of equipment is this?
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •