I found a used hayward sand filter . Model no. on the tank says SM 1915 SHG . The valve is cracked and the clamp is broke also . I checked different places for parts but I can't seem to find anything for this model no. Any help would be appreciated .
Hayward sand filter parts
- Thread starter wkeev
- Start date
Most of my Hayward parts (pump and filter) have a part number stamped on them somewhere. Look for SP-XXXX or SPX-XXXX.
Here is a parts breakdown with the components of a Hayward Sandmaster: http://www.inyopools.com/pool_parts_hayward_sand_master.aspx
I would try to find out which one you have the SM1600T or the SM1700T before buying parts. It should be figured out by measuring the width of the tank. 16" = SM1600, 17" = SM1700
I would try to find out which one you have the SM1600T or the SM1700T before buying parts. It should be figured out by measuring the width of the tank. 16" = SM1600, 17" = SM1700
On the inside of the valve I found SP0714C . I measured the tank it was 19'' across . The next question I have is the lateral center pipe replaceable or repairable ? It seems to be glued in place the one on mine is broken in half .
Last edited:
Don't think it's repairable. You'd need to buy the centerpipe assembly. You could reuse the laterals themselves.
I found a piece to repair it . 1.50 sure beats 150.00 . I called Hayward today the SP0714T1 is for the kit that includes the clamps and oring I bought it for 85.00 shipped .
Thanks for the replies