First of all, thx a lot for this site, what I know about pool I have learned here !
When starting to turn my pool into shape and form and based on the guidelines here at TFP, among other problems I have had to raise the CH.
My values:
FCL 4,01
TCL 4,29
CC 0,28
PH 7,6
ALY 89
CH 243
CYA 36
Temp 91 F
Water appears crystal clear.
To get to this level of CH I have added 14 kg. (31 lbs) CH+ (Calcium chloride) during a 2 weeks period. It seems like after a couple of days suddenly the calcium ends up on the bottom like white/greyish powder that is rather hard getting loose, I need to help my robot manually scrubbing. My sandfilter is able to catch and hold most of it. I have also noticed that the steel latter has been covered and not shiny blank as before.
I am using bleach for sanitation and Calcium hypo for schock.
Any ideas on this will be highly appreciated.
When starting to turn my pool into shape and form and based on the guidelines here at TFP, among other problems I have had to raise the CH.
My values:
FCL 4,01
TCL 4,29
CC 0,28
PH 7,6
ALY 89
CH 243
CYA 36
Temp 91 F
Water appears crystal clear.
To get to this level of CH I have added 14 kg. (31 lbs) CH+ (Calcium chloride) during a 2 weeks period. It seems like after a couple of days suddenly the calcium ends up on the bottom like white/greyish powder that is rather hard getting loose, I need to help my robot manually scrubbing. My sandfilter is able to catch and hold most of it. I have also noticed that the steel latter has been covered and not shiny blank as before.
I am using bleach for sanitation and Calcium hypo for schock.
Any ideas on this will be highly appreciated.