I have a mineral springs system which has stopped working...no power at the display, no chlorine in the pool. breaker is ok, cell is new replaced transistor on board last year...any suggestions would be appretiated. Thanks
Mineral springs bioguard system no display
- Thread starter gprising
- Start date
Can't Help,you with the SWG problem but you need to get some chlorine in the water fast or you will have a green pool. Plain bleach will,work.
Yes, Thank you, What I should have said was it is not producing chlorine...I have been adding since I noticed the swg was not working
that makes me feel better. How old is it? Could it be at the end of the cells life?
If you're not getting anything on the display, you could try resetting the display board. Turn off power to the unit and then remove and reinstall the display board.
If your power light is out, then it might be the thermistor.
If your power light is out, then it might be the thermistor.
There are no lights on...I replaced the thermistor and there are still no lights on. I will try resetting the display but think I am in fir a new board.