I have a neighbor, who has a friend, who has a dog…. that has some metal studs that are used. I'm waiting to hear what gauge and size they are but are there any potential problems with using used ones? Thanks!
Any problem building with used metal studs?
- Thread starter RiffeShooter
- Start date
I wouldn't think that should be an issue if the integrity of the studs are good (heavy rust or damage).
I agree. As long as they are in good structural shape they should be fine. I just finished my 1st project with them. Fun and different than 2x4s.
My outdoor kitchen is an L. 12' x 20'. Somehow the 8'x8' grew.... I used 350' of track and 300' of stud. Still finishing the outer skin of hardie backer so I will probably use more studs where seams show up.
My outdoor kitchen is an L. 12' x 20'. Somehow the 8'x8' grew.... I used 350' of track and 300' of stud. Still finishing the outer skin of hardie backer so I will probably use more studs where seams show up.
Thanks for this!!! I was going to ask this next. My initial plans are to build a U shaped island that is 8x12x8. Sounds like I'll need about the same amount.
I bought 400' of each just in case. Easier to return than have to go in the middle of the project for 2-3 more. Scraps % is small because you can use them for angle braces. I also used almost 1000 screws if that helps. Get some good gloves, magnetic level, (2) non-pivoting vise grips. Pivoting ones are a pain - they work but the pivot changes too much and slows down clamping.
I'll post pictures soon of what I've done.
I'll post pictures soon of what I've done.
Similar threads
