Hi - I have a pool/spa that was completed last fall. My problem is that my blower (Silencer 1.5hp) runs for a few minutes and then stops.
Other information: the spa has 6 Waterway Poly Storm jets and is about 40' from the equipment pad. I run the VSP pump at high speed (3100 RPM) when in spa mode. I have not used the blower much until recently, so I did not know about the problem previously.
Any troubleshooting assistance would be appreciated.
Other information: the spa has 6 Waterway Poly Storm jets and is about 40' from the equipment pad. I run the VSP pump at high speed (3100 RPM) when in spa mode. I have not used the blower much until recently, so I did not know about the problem previously.
Any troubleshooting assistance would be appreciated.