Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Strainer Pot Srung a Leak!!! Reliable Patch Untill the New one gets here?

  1. Back To Top    #1

    Join Date
    May 2014
    Location
    Tupelo, MS
    Posts
    13

    Strainer Pot Srung a Leak!!! Reliable Patch Untill the New one gets here?

    I replaced my Pentair 1.25 HP Challenger High Flow Pump this year.. Losing water at an in/day... So I found a couple of pinholes on strainer pot. I wont have the new one for a few days and its 100 degrees here... Is there a quick patch I can overlay the pinholes to inhibit the leaks so that I dont lose the water chemistry by just leaving it off?


    16x32 non salt with a new liner me and the buddies put in!

  2. Back To Top    #2

    Join Date
    Jan 2013
    Location
    Houston, TX
    Posts
    1,079

    Strainer Pot Srung a Leak!!! Reliable Patch Untill the New one gets here?

    Jb weld waterweld putty. To quote Elwood "it's powerful stuff"
    TFP Moderator Chris V. ~16K Pool & Spa, 48NSF DE, IG Plaster Circa 2000, Intermatic PE653, Challenger pump with a 2 speed B2984, 20gal stenner chlorine injection, Houston, TX
    One cannot follow Islam and Christianity at the same time, nor can one follow pool store methods and TFP at the same time.
    Pool School -- Pool Math -- TF-Test Kit

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •