Cell for CPSC-36 Available

ndenunz · Aug 9, 2014

After having issues with the control board for my CPSC-36 SWG, I decided against paying for repairs. Therefore, I have a three year old cell that was working fine before the control panel quit.

I hate to have it go to waste so I would be willing to give to anyone that wants it; just pay for shipping.

PM me if you are interested.

RobbieH · Aug 13, 2014

Darn, unfortunately that's too small for mine. A very generous offer for sure.

bobodaclown · Aug 13, 2014

Hey Robbie, It's pretty much plug and play for your unit, you'd have to go into the maintenance menu to change the cell setting. Are your running your 48 at 100%, If not it might be a good backup.

bdex · Aug 14, 2014

If I have a cpsc24 is it all the same control panel? My cell is 3 years old an a little undersized.

bobodaclown · Aug 14, 2014

Yes bdex, they're all the same control panel. You just have to set it up under the maintenance menu.

bdex · Aug 15, 2014

Ndenunz, where are you located? Kind of tossed up.
Would this then give me extra "capacity"? I know the 24 is 20k gallons and this one is probably 35k gallons. I have an 18k gallon pool. My 24 has had to be at 100% (which compupool says is same as 50% as far as life expectancy goes??). Could I run a 36 at day 50%. And does it matter? Is that how often it is running?

RobbieH · Aug 15, 2014

I'm running at 90% for 22 hours. I don't think I'd be a good candidate.

bdex · Aug 15, 2014

My pump runs 24/7 and I was at 100% with my 24 until I started kicking in a little LC to be able to turn down. I need to look into a timer.

ndenunz · Aug 18, 2014

bdex:

I am in NC