Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Intex above ground pool

  1. Back To Top    #1

    Join Date
    Aug 2014

    Intex above ground pool

    I just purchased and assembled 15' x 48' intex metal frame pool and when I was filling it, i noticed that there was water laying on top of ground cloth after about 3 hours of filling. The level does not look like it is dropping at all but the wetness is still there. Could I have a seam leaking and what should I do. The pool is over half full. The pool was brand new in box until yesterday and was purchased about 3 weeks ago. Any suggestions would be greatly appreciated.

  2. Back To Top    #2
    Lauranmark's Avatar
    Join Date
    Jul 2014
    Haverhill, MA

    Re: Intex above ground pool

    I had a leak on mine at install after a few inches of filling. the store agree'd to exchange the liner. when I drained it and began folding up the old liner there was wet dirt around about 4 small scuffy spots. My liner was on top of a tarp and my guess is the tarp was somewhat dirty from walking on it, hence the dirt transferring to the liner. I dont recall draggin the liner on anything but the tarp, but I might have. The second liner was gingerly carried and placed. Good Luck!
    -Mark Haverhill, MA
    AG 20'x52" Intex Pool
    Intex Sand Filter SF80110 (1600 GPH) 3 Amp
    Pool Installed July 2014
    AquaChek test strips (Free Chlorine)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts