Hey all, I recently posted a thread about my broken SWG and the cloudy/green water I came home to on Sunday. I had the water tested Monday and these were the results:
FC: .12
TC: .13
CC: .01
PH: 7
Hardness: 168
Alk: 115
CYA: 35
I have an IG 30,000 gallon pool with auto cover and mineral springs SWG. The pool store had me add 8# of zip chlor (sodium dichlor 97%) granular chlorine, 1# proteam ph up and 10# of proteam calcium up. I added all that Monday and finally got my SWG fixed thur morning. I ran the SWG on super chlorinate for 24 hr starting yesterday at 11 am. The water was still very cloudy so after reading some threads on here I picked up some Clorox bleach 8% to help out the SWG. I added a gallon of the bleach last night around midnight and the water is still cloudy today around noon.
Forgot to add that after adding the bleach there appeared to be white swirls on the top of the water, not sure what's causing that?
The only test kit I have at home are the strips and these were the results today:
TC: 2
FC: still very low around .15
PH: 7.2ish
So now I'm not really sure what to do? Should I keep adding bleach until it clears up or do I need to go pick up some more of the zip chlor granular? Sorry for the basic questions, this is our first year with the pool and it's been a handful. Had to replace the SWG cell, then the board went out and now this. Appreciate the help in advance!
FC: .12
TC: .13
CC: .01
PH: 7
Hardness: 168
Alk: 115
CYA: 35
I have an IG 30,000 gallon pool with auto cover and mineral springs SWG. The pool store had me add 8# of zip chlor (sodium dichlor 97%) granular chlorine, 1# proteam ph up and 10# of proteam calcium up. I added all that Monday and finally got my SWG fixed thur morning. I ran the SWG on super chlorinate for 24 hr starting yesterday at 11 am. The water was still very cloudy so after reading some threads on here I picked up some Clorox bleach 8% to help out the SWG. I added a gallon of the bleach last night around midnight and the water is still cloudy today around noon.
Forgot to add that after adding the bleach there appeared to be white swirls on the top of the water, not sure what's causing that?
The only test kit I have at home are the strips and these were the results today:
TC: 2
FC: still very low around .15
PH: 7.2ish
So now I'm not really sure what to do? Should I keep adding bleach until it clears up or do I need to go pick up some more of the zip chlor granular? Sorry for the basic questions, this is our first year with the pool and it's been a handful. Had to replace the SWG cell, then the board went out and now this. Appreciate the help in advance!