We are just installing an 16x32 intex ultra frame. Am planning on using the 2650 gph pump and separate intex swg. We are wanting to put the equipment by the house instead of next to the pool. (Could put it closer to pool but will work much better if up by house for power, backwash, fit.) It just occurred to me that this may be a gravity fed pump--not sure. The yard slopes up towards the house so the pump will be about level with pool top, maybe a little lower. It's also about 50 feet from the pump to where the lines will divert around the pool. Plan on putting 3 hayward eyeball returns with slotted eyes,(one replaces original intex return), 1 Hayward thru wall skimmer, and 1 pool sweep(putting where original intex side wall strainer is). Will this work. I've never had an above ground pool. We may upgrade in the future to bigger equipment (I have an older 1.5 hp and big DE filter but know nothing about them so decided to just use the intex equipment that came with pool--bought swg separte. I'm worried it won't draw water well enough if it is gravity fed, and I'm concerned with length of run to pool. Help/input appreciated. Thanks