Where to buy new wire for my heater?

[jrguzmanr]

I have a hayward H400 ED1 milivolt, that is not working and as i was troubleshooting I was trying to remove one of the wires from a switch and the lead broke off the switch and stayed attached to the wire. It is so rusted that I can't pull it from the wire. Where can I get a new wire? The switch is #25 in the diagram, part #HAXTLK1930. I'm not home so I don't remember what the other end of the wire was connected to.

http://www.poolcenter.com/p/h-series-millivolt-electronic-ed1-style-page-1

 

[ps0303]

I think you are referring to one of the limits, HAXTLK1930. You can get the stranded wire from any big box home improvement store.

 

[jrguzmanr]

just in case somebody has the same issues I had, the big box store didn't have wires that met the standards, according to the heater manual. The manual states 105 degrees C, the store's wire only had up to 90, furthermore their connectors are rated 75 C. I did find what I needed on the Internet big store.