Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 4 of 4

Thread: Heavy rains last night

  1. Back To Top    #1

    Join Date
    Aug 2013
    Location
    Hilton Head, SC
    Posts
    129

    Heavy rains last night

    Had 2" of rain in my pool last night. Haven't posted any #'s in a while, so would love some advice.

    FC. 4
    CC. .5
    PH. 7.5
    TA. 90
    CH. 100
    CYA. 30

    Water crystal clear
    Temp. 82

    Suggestions?

    Thx
    4k, IG, Gunnite, Jandy Valve, 1HP Haywood, 2" flow, single 2" line for skimming & vacuum, Pentair FNSP 36 DE w/125 GPM Multiport 50 PSI, TF-100 Test Kit, built 1991, Hilton Head, SC

  2. Back To Top    #2
    Mod Squad woodyp's Avatar
    Join Date
    Apr 2010
    Location
    East Texas
    Posts
    9,004

    Re: Heavy rains last night

    If your water is a little cloudy, I'd bump up the FC a couple of points and circulate more.
    16x32x52" Steel Cornelius Miramar AGP Vinyl liner 13,100 gal. Buried 2 ft.
    2 Speed Hayward Power-Flo Matrix 85 g.p.m. 22" 250lb. sand filter hard plumbed
    Pool Rover Jr., Pool Blaster Max, Diver Dave TF100 Test Kit/Speed Stir
    Margaritaville Frozen Concoction Maker, Liqour Chiller, & Drink Mixer & Party Tub----Collect 'um all!

  3. Back To Top    #3

    Join Date
    Aug 2013
    Location
    Hilton Head, SC
    Posts
    129

    Re: Heavy rains last night

    Doesn't seem cloudy but I am going to take the FC up a couple points.

    Thx
    4k, IG, Gunnite, Jandy Valve, 1HP Haywood, 2" flow, single 2" line for skimming & vacuum, Pentair FNSP 36 DE w/125 GPM Multiport 50 PSI, TF-100 Test Kit, built 1991, Hilton Head, SC

  4. Back To Top    #4

    Join Date
    Aug 2013
    Location
    Hilton Head, SC
    Posts
    129

    Re: Heavy rains last night

    Should I be concerned about the CH level? I've tested this several times, and note it's way below the recommended level.

    The pool is under a couple of live oaks that constantly drop bits of debris in and some of the debris creates stains on the pool bottom. They disappear after a day or so, but are unsightly.
    4k, IG, Gunnite, Jandy Valve, 1HP Haywood, 2" flow, single 2" line for skimming & vacuum, Pentair FNSP 36 DE w/125 GPM Multiport 50 PSI, TF-100 Test Kit, built 1991, Hilton Head, SC

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •