Any ideas for soaking taller cartridges?
- Thread starter salinda
- Start date
Re: How to clean a cartridge filter
This is what I use to soak all 4 in at the same time.http://www.homedepot.com/p/Toter-64-gal-Wheeled-Trash-Can-Cart-025564-01GRS/100130308
My filters are 25.5" tall so they all just fit.
This is what I use to soak all 4 in at the same time.http://www.homedepot.com/p/Toter-64-gal-Wheeled-Trash-Can-Cart-025564-01GRS/100130308
My filters are 25.5" tall so they all just fit.
Re: How to clean a cartridge filter
Mine are much taller--32 1/16" Did you post a picture of what you use?
Mine are much taller--32 1/16" Did you post a picture of what you use?
Re: How to clean a cartridge filter
My filter is about 30 " tall. I bought one of those plastic storage bins with the cover that was about 32 " long. The filter fits in there no problem, and the cover is nice to keep kids out of it. Only thing is that it is heavy with all that water/cleaning solution in it, but works great.
My filter is about 30 " tall. I bought one of those plastic storage bins with the cover that was about 32 " long. The filter fits in there no problem, and the cover is nice to keep kids out of it. Only thing is that it is heavy with all that water/cleaning solution in it, but works great.
elwood58
LifeTime Supporter
A Large Plastic Trash Can works pretty well. It does not have to be dedicated to this use either. Just put a liner in and add your solution/water. Close it up and give them a good soak.
Similar threads
