Hi, I'm looking for help on completely re-programming our Pentair EasyTouch system. In a bout of frustration with the water only filtering from spa to pool, I erased the memory of the whole darn thing. (Still having that filter issue, btw... naturally). I have been trying to make sense of the user manual and anything I can gather in online forums over the past week, to no avail. The notoriously confusing language used by Pentair and the lack of step-by-step instructions anywhere that I can find have left me feeling pretty helpless. I'm hoping the trouble free pool community can help me out.
What I need are step-by-step instructions from ground zero. It is best to assume I know nothing. While I've educated myself quite a bit on this stuff, I still need to have it expressed in clear, simple terms, starting with Step 1. Please let me know any information that I can provide to help us get there. I am so incredibly thankful for any advice you have, and of course, for your patience. I know from my endless searching that there are many others who could be helped by this information.
What I need are step-by-step instructions from ground zero. It is best to assume I know nothing. While I've educated myself quite a bit on this stuff, I still need to have it expressed in clear, simple terms, starting with Step 1. Please let me know any information that I can provide to help us get there. I am so incredibly thankful for any advice you have, and of course, for your patience. I know from my endless searching that there are many others who could be helped by this information.