This is my second season with the pool. I have the SWG and the pump plugged into an outside power outlet. The safety outlet with the special switch (can't remember the name) is in the bathroom. I went to turn on the SWG and pump and had no power. I went inside the house and reset the outlet in the house. Seconds later the unit reset button popped and again I reset it. This continued to happen.
I went outside and unplugged the SWG and pump from the extensions cords (that lead to the outside outlet). I came back in and reset the button and it is doing fine now. But if I plug up the SWG and pump again, it will pop and have to be reset. We have had two days of a lot of rain. Is it possible there is some water in the outside plugs causing this short? (I always unplug everything before getting in the pool).
I truly don't know anything about electricity but I have the utmost respect for it. Any thoughts or suggestions.
I went outside and unplugged the SWG and pump from the extensions cords (that lead to the outside outlet). I came back in and reset the button and it is doing fine now. But if I plug up the SWG and pump again, it will pop and have to be reset. We have had two days of a lot of rain. Is it possible there is some water in the outside plugs causing this short? (I always unplug everything before getting in the pool).
I truly don't know anything about electricity but I have the utmost respect for it. Any thoughts or suggestions.