Started the process this morning, please bear with me on my chemistry numbers. I have an cheap OTO test kit that only reads FC and CC up to 5, my TF-100 will arrive tomorrow. Here is the process so far:
6/18/2014
FC CC Ph TA BQ Chlorine added Comments
8:30 0 0 7.8 120 50 ' +2.5 gal. 12.5% Chlorine filter started
11:30 1 1 ' +5 gal. 12.5% Chlorine brushed floor/sides, cleaned skimmer
13:30 0.5 1 ' +5 gal. 12.5% Chlorine skimmed foam on water, brushed floor/sides, clean skimmer, backwash/rinse
14:30 1 5 ' +2.5 gal. 12.5% Chlorine skimmed foam on water, brushed floor/sides, clean skimmer
15:30 2 5 ' +2.5 gal. 12.5% Chlorine skimmed foam on water, brushed floor/sides, clean skimmer
17:30 5 5 7.6 skimmed foam on water, brushed floor/sides, clean skimmer
19:30 5 5 ' +2.5 gal. 12.5% Chlorine no remaining foam on water, brushed sides, vaccuum bottom, clean skimmer, backwash/rinse
6/18/2014
FC CC Ph TA BQ Chlorine added Comments
8:30 0 0 7.8 120 50 ' +2.5 gal. 12.5% Chlorine filter started
11:30 1 1 ' +5 gal. 12.5% Chlorine brushed floor/sides, cleaned skimmer
13:30 0.5 1 ' +5 gal. 12.5% Chlorine skimmed foam on water, brushed floor/sides, clean skimmer, backwash/rinse
14:30 1 5 ' +2.5 gal. 12.5% Chlorine skimmed foam on water, brushed floor/sides, clean skimmer
15:30 2 5 ' +2.5 gal. 12.5% Chlorine skimmed foam on water, brushed floor/sides, clean skimmer
17:30 5 5 7.6 skimmed foam on water, brushed floor/sides, clean skimmer
19:30 5 5 ' +2.5 gal. 12.5% Chlorine no remaining foam on water, brushed sides, vaccuum bottom, clean skimmer, backwash/rinse
