Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Polaris QT blower. Bonding?

  1. Back To Top    #1

    Join Date
    Apr 2014
    Location
    Plano, TX
    Posts
    4

    Polaris QT blower. Bonding?

    Newb question here. I replaced our old metal spa blower with a new Polaris QT. The old one had a metal housing and a connection point for the bonding wire, which runs to the pump. The QT does not have an obvious mounting point. The manual does not point one out. Am I correct in assuming that because the housing is plastic it does not need to be part of the bonding? If it does, where does it mount?

  2. Back To Top    #2
    JasonLion's Avatar
    Join Date
    May 2007
    Location
    Silver Spring, MD
    Posts
    37,879

    Re: Polaris QT blower. Bonding?

    As long as it is at least five feet horizontally away from the water, or further, you shouldn't need to bond the blower.
    19K gal, vinyl, 1/2 HP WhisperFlo pump, 200 sqft cartridge filter, AutoPilot Digital SWG, Dolphin Dynamic cleaning robot
    Creator of PoolMath and Pool Calculator. Other handy links: Support this site, TF Test Kits, Pool School

  3. Back To Top    #3

    Join Date
    Apr 2014
    Location
    Plano, TX
    Posts
    4

    Re: Polaris QT blower. Bonding?

    Ok thanks. It definitely meets the distance criteria.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •