Hello, I am in need of some help with my above ground pool. My fiancé and I bought a foreclosure home with an above ground swamp. There was a tarp that barely covered the top. When we took it off, it looked like there is about 2 years’ worth of leaves at the bottom. We have done our very best to clean out as much leaves as possible, without being able to see the bottom of the pool. It seems to be a never ending process. I bought a leaf eater to help. We have replaced the filter and have had the pump running with no problems for a few weeks. I bought a Taylor k2006 testing kit. My results as of today at 4:00pm are …
FC 0
CC 0
PH 8.0
TA 60
CYA 50
I need your help with what step I should take next. I think I am close to slamming it but I believe I need to get my PH down first? To do this PoolMath is telling me to add 90oz of backing soda and 9.9oz of muriatic acid. Does this sound correct? I am open to any advice. I am very new to the pool world and any help would be greatly appreciated. I have read pool school over and over and ordered my kit. I’m ready to do this!!
FC 0
CC 0
PH 8.0
TA 60
CYA 50
I need your help with what step I should take next. I think I am close to slamming it but I believe I need to get my PH down first? To do this PoolMath is telling me to add 90oz of backing soda and 9.9oz of muriatic acid. Does this sound correct? I am open to any advice. I am very new to the pool world and any help would be greatly appreciated. I have read pool school over and over and ordered my kit. I’m ready to do this!!