I have a 15 by 48 inch Intex frame pool. I'd like to connect a Hayward SP1091LX Dyna-Skim. Install seems simple enough. My question is safety. Do you guys always turn off your skimmer when kids are in pool so parts / hair don't get sucked in? If so, how do you activate a pool fountain that would run off the same water circuit. Also, it seems that the skimmer is installed near the top of the pool liner. However I typically run my pool almost to the top. Does this mean you have to drain it a "few colored rows on the liner" down?
I have an Intex salt water system / pump connected to Intext in/outs.
last year I ran another pump with sand filter and just hung the extra in/out tubing into the pool. My project this summer is to install the skimmer, cut a new intake valve, and replace all the hosing with 1.5 inch pvc.... Great forum... thanks...
I have an Intex salt water system / pump connected to Intext in/outs.
last year I ran another pump with sand filter and just hung the extra in/out tubing into the pool. My project this summer is to install the skimmer, cut a new intake valve, and replace all the hosing with 1.5 inch pvc.... Great forum... thanks...