I am a new owner of a 22' AG intex ultra frame pool. I just finished the set up and fill for the 3rd time and I am still having issues with the positioning of the legs and the level of the water line. My pool is advertised as 52" deep, right now it is 45" ( I measured about 5" away from the wall) on the deep side and 41" on the low. I used some 2"x6"x8" support pads under the feet around the low side then dropped down to 1"x6"x10" around the middle then nothing on the high side.
My question is if I jack up the low side of the pool, the deeper water side, and added another inch of support on top of the 2x6 would that help level the water line? My thought is raising the support legs will only raise the liner seam and not really adjust the water line..
Also, are the legs supposed to be vertically level in&out left&right or is the pool liner supposed to push against the legs?
Thanks in advance for your time and advice
I will post pics as soon as I figure out how.
My question is if I jack up the low side of the pool, the deeper water side, and added another inch of support on top of the 2x6 would that help level the water line? My thought is raising the support legs will only raise the liner seam and not really adjust the water line..
Also, are the legs supposed to be vertically level in&out left&right or is the pool liner supposed to push against the legs?
Thanks in advance for your time and advice
I will post pics as soon as I figure out how.