My salt cell has the low salt and inspect cell light on. It is a brand new cell. The readings inside the cabinet read:
300
t-15
r1.55
al-1
-0
36P
0.00
32.7
74
and back to 300
I have tried to reset the system, but haven't had any luck. If there was a number like 2500 or 2300, I could believe that was the correct salt level, but there is nothing even close to that. I am guessing the 300 is the salt level, but the pool has had a salt system for years and there is no way that the level is actually that low. If any of you has any input on this I would much appreciate it.
300
t-15
r1.55
al-1
-0
36P
0.00
32.7
74
and back to 300
I have tried to reset the system, but haven't had any luck. If there was a number like 2500 or 2300, I could believe that was the correct salt level, but there is nothing even close to that. I am guessing the 300 is the salt level, but the pool has had a salt system for years and there is no way that the level is actually that low. If any of you has any input on this I would much appreciate it.