We just moved in here 2 weeks ago, and i'm slowly getting to each issue around the house. I just finished the slam and all is well chemistry wise. Yes i know i need to fix/ replace the conduit)
Here is my timer. Its a two unit timer, the left one running the main pump 2.2HP Centurion, and the right side running my booster pump for my pool cleaner. The time on the booster pump doesnt keep time? Ideas on troubnleshooting this?
Here are the air controls. I Have pulled out the air switches, and gotten a small piece of tubing. One switch functions properly and the other is trash. The box on the Left Clicks as if it is getting the air pressure signal whenn i hook up the switch and short tube, but nothing turns on. (the box has power). The box on the right on the other hand, does nothing when hooked up to the working air switch.... Any ideas on trouble shooting this?
Now the real irritating one... I pulled the light last week, and took it apart, the bulb was broken in half, and i had to remove the base with the old pototato trick. Here is where it gets strange (no water in unit). There is power to the unit at the cylindrical thing on the left of the bulb socket thats covered in paper(capicitor? resistor?), but no power to the base of the bulb socket. Theres power at the light switch and the gfci, so i assume i just need to replace the whole thing???
Here is my timer. Its a two unit timer, the left one running the main pump 2.2HP Centurion, and the right side running my booster pump for my pool cleaner. The time on the booster pump doesnt keep time? Ideas on troubnleshooting this?
Here are the air controls. I Have pulled out the air switches, and gotten a small piece of tubing. One switch functions properly and the other is trash. The box on the Left Clicks as if it is getting the air pressure signal whenn i hook up the switch and short tube, but nothing turns on. (the box has power). The box on the right on the other hand, does nothing when hooked up to the working air switch.... Any ideas on trouble shooting this?
Now the real irritating one... I pulled the light last week, and took it apart, the bulb was broken in half, and i had to remove the base with the old pototato trick. Here is where it gets strange (no water in unit). There is power to the unit at the cylindrical thing on the left of the bulb socket thats covered in paper(capicitor? resistor?), but no power to the base of the bulb socket. Theres power at the light switch and the gfci, so i assume i just need to replace the whole thing???