Make any changes or leave as is?

Shaf77

0
Jun 10, 2010
242
Toronto, ON. Canada
Here are my readings from this morning.

FC - 5
CYA - 60
TA - 80
PH - 7.4

I put in my reading in pool calc and it says to add 202g by weight of washing soda/soda ash OR add 402g weight of borax.

Should I up my PH to 7.5? Or do I need to do anything else?

Also - what is washing soda? What is it sold as? I have only ever needed to use bleach or stabilizer. Never used washing soda or borax.
 
Re: Make and changes or leave as is?

He has a SWG. The FC/CYA chart for SWG pools shows a minimum of 3 and a target of 4. His FC of 5 is fine, but bumping it up a little won't hurt anything. He also does not need to add washing soda or borax, and likely will never need them. His pH will tend to drift up when the SWG is running. His CYA is also fine. We don't know his calcium hardness or his pool surface. Assuming the CH is right for his pool surface, he is right where he needs to be.
 
Re: Make and changes or leave as is?

Thanks. Just out of curiosity what is washing soda sold as?
0003320003020_500X500.jpg
 

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.