I'm probably asking something that has been asked before but I couldn't find the answer I'm looking for. I don't completely understand how TO affects my PH. I'm trying to balance my pool so that I don't have problems later. The water is crystal clear but some of my readings are out of the range I see in the Pool School. My readings are:
FCL - 1.3
TCL - 1.42
PH - 7.9
TA - 153
CH - 162
CYA - 35
I realize my PH is not that far out of spec, but I'd like to keep it on the lower end of the range to compensate for heavy swimmer load and rain. (Kids swim in it daily!). I've already used a gallon of MA and it only went from 8.0 to 7.9!
Btw - I'm using a LaMotte ColorQ 2056 Test kit with fresh reagents and CYA tablets.
Thanks in advance!
FCL - 1.3
TCL - 1.42
PH - 7.9
TA - 153
CH - 162
CYA - 35
I realize my PH is not that far out of spec, but I'd like to keep it on the lower end of the range to compensate for heavy swimmer load and rain. (Kids swim in it daily!). I've already used a gallon of MA and it only went from 8.0 to 7.9!
Btw - I'm using a LaMotte ColorQ 2056 Test kit with fresh reagents and CYA tablets.
Thanks in advance!